Science Bodyboards Pro Flare Tri Quad Vent Polypro Core Bodyboard 2024/25 Model


 

 

Designed by Mike Stewart, arguably the most respected and well known wave rider of all time, is the man behind Science Bodyboards.
With over 30 years experience riding the best waves on the planet you can be sure you're getting the best board possible when you ride a Science Board.

The versatility of the Pro given its balance of curve in the template makes it a must have for any quiver.  The Pro Flare Tri Quad Vent showcases a Dual Density Slick (DDS) in addition to modern performance materials.  DDS is a unique mixture of Low and High Density PE, for a balanced combination of form, flex, and recoil.  Dual Density offers exceptional durability without sacrifice of function.

FEATURES
TEMPLATE: Tanner
CORE: Polypro (PP) Core
Polypro Core is a state of the art engineered bodyboard core. A lightweight core that is fusion formed to create a nucleus that delivers incredible flexural properties,
including instant recoil, added projection, enhanced longitudinal stiffness & awesome compression strength. 100% waterproof.
STRINGER: 1 x RCS Stringer
SLICK: Flare Graphic Dual Density HDPE Slick // Surlyn Slick 
DECK: WaveCushion Air 8lb PE Deck
RAILS: 55/45 Double Rails
TAIL: Tri Scallop Crescent Tail with Tail Piece
ADDITIONAL FEATURES: Quad Vent Channels, TM Contoured Deck, Slick Mesh, TM Channels, Nose Bulbs, Screened Deck/ Slick Print, Tanner Deck Heat Stamp

Tech: Tri Quad Vent Concave
The New Tri / Quad Channel Tail combo is a on or off Channel System. It engages when you need it and has a normal ride in cruise mode.The Four Channels are narrow and deep with a flat section in centre to help give you a bit more release when you need it. Push hard on your rail and the quads rip in with hold and drive and combined with the Tri Crescent hooks in the First and Fourth Channel this allows you to turn sharper and still keep the hold and drive your after.

PRO FLARE FLEX FACTOR - F5
SCIENCE BODYBOARD FLEX FACTOR RATING
You may have noticed your equipment works differently depending on the temperature. The way a board flexes and recoils in warm conditions is different than in the cold.
Your personal preference for what you consider as optimum flex is unique to where you live and what your local temperatures are. To take the guess work out of which of our boards is softer (generally better for colder conditions) or stiffer (generally better for warmer conditions) and to help you dial in flex we have created the Science Flex Factor. F1 being the stiffest composition we make and F10 being the softest.
If the board indicates a F+ then an ISS Stringer is in place (e.g. F3+) the flex rating becomes a +or- depending on the ISS Stringer being used.
- Science Flex Factor System is only relative to the Science Bodyboard Range and should not be compared to any other Brands

Colourways:
Black Deck// Black Pinline// Black Rails// Blue Flare Slick 
 

Here's Tanner ripping on his model: